The technical name for missing electrons in a p-type semiconductor is holes.
the verdict
SUPPORTED
the evidence backs this
refutedsupported
the weight of evidence
2 sources for · 0 against
AS REPORTEDno primary record reached; this is what the reporting says
Reference encyclopedia sources establish that in a semiconductor, positions where valence electrons are missing are called holes, which serve as the positive charge carriers in a p-type semiconductor.
carriers are often electrons moving through a wire. In semiconductors, the charge carriers can be electrons or holes. In an electrolyte, the charge carriers
An electric current is a flow of charged particles, such as electrons or ions, through an electrical conductor or space. It is defined as the net rate at which electric charge flows through a surface. The moving particles are called charge carriers, which may be of several types, depending on the conductor. In electric circuits, the charge carriers are often electrons moving through a wire. In s
In a semiconductor it is sometimes useful to think of the current as due to the flow of positive "holes" (the mobile positive charge carriers that are places where the semiconductor crystal is missing a valence electron). This is the case in a p-type semiconductor. A semiconductor has electrical conductivity intermediate in magnitude between that of a conductor and an insulator. This means a conductivity roughly in the range of 10−2 to 104 siemens per centimeter (S⋅cm−1).
In the classic crystalline semiconductors, electrons can have energies only within certain bands (i.e. ranges of levels of energy). Energetically, these bands are located between the energy of the ground state, the state in which electrons are tightly bound to the atomic nuclei of the material, and the free…
donating electrons to the conduction band or producing holes in the valence band. (A "hole" is a position where an electron is missing; such holes can behave
Electrical resistivity (also called volume resistivity or specific electrical resistance) is a fundamental specific property of a material that measures its electrical resistance or how strongly it resists electric current. A low resistivity indicates a material that readily allows electric current. Resistivity is commonly represented by the Greek letter ρ (rho). The SI unit of electrical resistiv
In metals, the Fermi level lies in the conduction band (see Band Theory, above) giving rise to free conduction electrons. However, in semiconductors the position of the Fermi level is within the band gap, about halfway between the conduction band minimum (the bottom of the first band of unfilled electron energy levels) and the valence band maximum (the top of the band below the conduction band, of filled electron energy levels). That applies for intrinsic (undoped) semiconductors. This means that at absolute zero temperature, there would be no free conduction electrons, and the resistance is infinite. However, the resistance decreases as the charge carrier density (i.e., without introducing further complications, the density of electrons) in the conduction band increases. In extrinsic (doped) semiconductors, dopant atoms increase the majority charge carrier concentration by donating electrons to the conduction band or producing holes in the valence band. (A "hole" is a position where an electron is missing; such holes can behave in a similar way to electrons.) For both types of donor or acceptor atoms, increasing dopant density reduces resistance. Hence, highly doped semiconductors behave metallically. At very high temperatures, the contribution of thermally generated carriers dominates over the contribution from dopant atoms, and the resistance decreases exponentially with temperature.
Everything we examined (2) — 1 independent source
This check searched the claim as stated. It did not run a separate search for evidence against it.