Friend, The Theory of Valency (1909), p. 111.) The aqueous solution behaves on concentration similarly to the other halogen acids; E. Deussen (Zeit. anorg. Chem., 1905, 44, pp. 300, 408; 1906, 49, p. 297) found the solution of constant boiling point to contain 43.2% HF and to boil at 110° (750 mm.). The salts of hydrofluoric acid are known as fluorides and are easily obtained by the action of the acid on metals or their oxides, hydroxides or carbonates. The fluorides of the alkali metals, of silver, and of most of the heavy metals are soluble in water; those of the alkaline earths are insoluble. A characteristic property of the alkaline fluorides is their power of combining with a molecule of hydrofluoric acid and with the fluorides of the more electro-negative elements to form double fluorides, a behaviour not shown by other metallic halides. Fluorides can be readily detected by their power of etching glass when warmed with sulphuric acid; or by warming them in a glass tube with concentrated sulphuric acid and holding a moistened glass rod in the mouth of the tube, the water apparently gelatinizes owing to the decomposition of the silicon fluoride formed. It is never found in the uncombined condition, but in combination with calcium as fluor-spar CaF 2 it is widely distributed; it is also found in cryolite Na 3 AlF 6 , in fluor-apatite, CaF 2 ·3Ca 3 P 2 O 8 , and in minute traces in sea-water, in some mineral springs, and as a constituent of the enamel of the teeth. It was first isolated by H. Moissan in 1886 by the electrolysis of pure anhydrous hydrofluoric acid containing dissolved potassium fluoride. The U-shaped electrolytic vessel and the electrodes are made of an alloy of platinum-iridium, the limbs of the tube being closed by stoppers made of fluor-spar, and fitted with two lateral exit tubes for carrying off the gases evolved. Whilst the electrolysis is proceeding, the apparatus is kept at a constant temperature of −23° C. by means of liquid methyl chloride. The fluorine, which is liberated as a gas at the anode, is passed through a well cooled platinum vessel, in order to free it from any acid fumes that may be carried over, and finally through two platinum tubes containing sodium fluoride to remove the It is the most active of all the chemical elements; in contact with hydrogen combination takes place between the two gases with explosive violence, even in the dark, and at as low a temperature as −210° C; finely divided carbon burns in the gas, forming carbon tetrafluoride; water is decomposed even at ordinary temperatures, with the formation of hydrofluoric acid and “ozonised” oxygen; iodine, sulphur and phosphorus melt and then inflame in the gas; it liberates chlorine from chlorides, and combines with most metals instantaneously to form fluorides; it does not, however, combine with oxygen. Organic compounds are rapidly attacked by the gas. 173) by decomposing the double fluoride of hydrogen and potassium, at a red heat in a platinum retort fitted with a platinum condenser surrounded by a freezing mixture, and having a platinum receiver luted on. It can also be prepared in the anhydrous condition by passing a current of hydrogen over dry silver fluoride. The pure acid thus obtained is a most dangerous substance to handle, its vapour even when highly diluted with air having an exceedingly injurious action on the respiratory organs, whilst inhalation of the pure vapour is followed by death. The anhydrous acid boils at 19°.5 C. (H. Moissan), and on cooling, sets to a solid mass at −102°.5 C, which melts at −92°.3 C. (K. Olszewski, Monats. für Chemie , 1886, 7, p. 371). Potassium and sodium readily dissolve in the anhydrous acid with evolution of hydrogen and formation of   ​ fluorides. The aqueous solution is strongly acid to litmus and dissolves most metals directly. Its most important property is that it rapidly attacks glass, reacting with the silica of the glass to form gaseous silicon fluoride, and consequently it is used for etching. T. E. Thorpe ( Jour. Chem. Soc. , 1889, 55, p. 163) determined the vapour density of hydrofluoric acid at different temperatures, and showed that there is no approach to a definite value below about 88° C. where it reaches the value 10.29 corresponding to the molecular formula HF; at temperatures below 88° C. the value increases rapidly, showing that the molecule is more complex in its structure. (For references see J. N. Friend, The Theory of Valency (1909), p. 111.) The aqueous solution behaves on concentration similarly to the other halogen acids; E. Deussen ( Zeit. anorg. Chem. , 1905, 44, pp. 300, 408; 1906, 49, p. 297) found the solution of constant boiling point to contain 43.2% HF and to boil at 110° (750 mm.). The salts of hydrofluoric acid are known as fluorides and are easily obtained by the action of the acid on metals or their oxides, hydroxides or carbonates. The fluorides of the alkali metals, of silver, and of most of the heavy metals are soluble in water; those of the alkaline earths are insoluble. A characteristic property of the alkaline fluorides is their power of combining with a molecule of hydrofluoric acid and with the fluorides of the more electro-negative elements to form double fluorides, a behaviour not shown by other metallic halides. Fluorides can be readily detected by their power of etching glass when warmed with sulphuric acid; or by warming them in a glass tube with concentrated sulphuric acid and holding a moistened glass rod in the mouth of the tube, the water apparently gelatinizes owing to the decomposition of the silicon fluoride formed. The atomic weight of fluorine has been determined by the conversion of calcium, sodium and potassium fluorides into the corresponding sulphates. J. Berzelius, by converting silver fluoride into silver chloride, obtained the value 19.44, and by analysing calcium fluoride the value 19.16; the more recent work of H. Moissan gives the value 19.05. See H.

of +1 (Ag+), silver halides in which the silver atoms have oxidation states of +2 (Ag2+) are known, of which silver(II) fluoride is the only known stable A silver halide (or silver salt) is one of the chemical compounds that can form between the element silver (Ag) and one of the halogens. In particular, bromine (Br), chlorine (Cl), iodine (I) and fluorine (F) may each combine with silver to produce silver bromide (AgBr), silver chloride (AgCl), silver iodide (AgI), and four forms of silver fluoride, respectively. As a group, they are often referre S… A silver halide (or silver salt) is one of the chemical compounds that can form between the element silver (Ag) and one of the halogens. In particular, bromine (Br), chlorine (Cl), iodine (I) and fluorine (F) may each combine with silver to produce silver bromide (AgBr), silver chloride (AgCl), silver iodide (AgI), and four forms of silver fluoride, respectively. As a group, they are often referred to as the silver halides, and are often given the pseudo-chemical notation AgX. Although most silver halides involve silver atoms with oxidation states of +1 (Ag+), silver halides in which the silver atoms have oxidation states of +2 (Ag2+) are known, of which silver(II) fluoride is the only known stable one. Silver halides are light-sensitive chemicals, and are commonly used in photographic film and paper. Silver halides are used in photographic film and photographic paper, including graphic art film and paper, where silver halide crystals in gelatin are coated on to a film base, glass or paper substrate. The gelatin is a vital part of the emulsion as the protective colloid of appropriate physical and chemical properties. The gelatin may also contain trace elements (such as sulfur) which increase the light sensitivity of the emulsion, although modern practice uses gelatin without such components. When a silver halide crystal is exposed to light, a sensitivity speck on the surface of the crystal is turned into a speck of metallic silver (these comprise the invisible or latent image). If the speck of silver contains approximately four or more atoms, it is rendered developable - meaning that it can undergo development which turns the entire crystal into metallic silver. Areas of the emulsion receiving larger amounts of light (reflected from a subject being photographed, for example) undergo the greatest development and therefore results in the highest optical density. Silver bromide and silver chloride may be used separately or combined, depending on the sensitivity and tonal qualities desired in the product. Silver iodide is always combined with silver bromide or silver chloride, except in the case of some historical processes such as the collodion wet plate and daguerreotype, in which the iodide is sometimes used alone (generally regarded as necessary if a daguerreotype is to be developed by the Becquerel method, in which exposure to strong red light, which affects only the crystals bearing latent image specks, is substituted for exposure to mercury fumes). Silver fluoride is not used in photography. When absorbed by an AgX crystal, photons cause electrons to be promoted to a conduction band (de-localized electron orbital with higher energy than a valence band) which can be attracted by a sensitivity speck, which is a shallow electron trap, which may be a crystalline defect or a cluster of silver sulfide, gold, other trace elements (dopant), or combination thereof, and then combined with an interstitial silver ion to form a silver metal speck. Silver halides are also used to make corrective lenses darken when exposed to ultraviolet light (see photochromism). Silver halides, except for silver fluoride, are very insoluble in water. Silver nitrate can be used to precipitate halides; this application is useful in quantitative analysis of halides. 689-703 The three main silver halide compounds have distinctive colours that can be used to quickly identify halide ions in a solution. The silver chloride compound forms a white precipitate, silver bromide a creamy coloured precipitate and silver iodide a yellow coloured precipitate. Some compounds can considerably increase or decrease the solubility of AgX. Examples of compounds that increase the solubility include: cyanide, thiocyanate, thiosulfate, thiourea, amines, ammonia, sulfite, thioether, crown ether. Examples of compounds that reduces the solubility include many organic thiols and nitrogen compounds that do not possess solubilizing group other than mercapto group or the nitrogen site, such as mercaptooxazoles, mercaptotetrazoles, especially 1-phenyl-5-mercaptotetrazole, benzimidazoles, especially 2-mercaptobenzimidazole, benzotriazole, and these compounds further substituted by hydrophobic groups. Compounds such as thiocyanate and thiosulfate enhance solubility when they are present in a sufficiently large quantity, due to formation of highly soluble complex ions, but they also significantly depress solubility when present in a very small quantity, due to formation of sparingly soluble complex ions.