In an alternating current circuit, electrons oscillate back and forth rather than flowing continuously from the source to the device
the verdict
SUPPORTED
the evidence backs this
refutedsupported
the weight of evidence
2 sources for · 0 against
AS REPORTEDno primary record reached; this is what the reporting says
Reference material confirms that alternating electric currents involve electrons oscillating back and forth rather than flowing continuously in one direction.
electric currents, consisting of electrons flowing back and forth in a specially shaped metal conductor called an antenna. An electronic device called a
Radio waves (formerly called Hertzian waves) are a type of electromagnetic radiation with the lowest frequencies and the longest wavelengths in the electromagnetic spectrum, typically with frequencies below 300 gigahertz (GHz) and wavelengths greater than 1 millimeter (3⁄64 inch), about the diameter of a grain of rice. Radio waves with frequencies above about 1 GHz and wavelengths shorter than 30
Ra…
In radio communication systems, information is transported across space using radio waves. At the sending end, the information to be sent, in the form of a time-varying electrical signal, is applied to a radio transmitter. The information, called the modulation signal, can be an audio signal representing sound from a microphone, a video signal representing moving images from a video camera, or a digital signal representing data from a computer. In the transmitter, an electronic oscillator generates an alternating current oscillating at a radio frequency, called the carrier wave because it creates the radio waves that "carry" the information through the air. The information signal is used to modulate the carrier, altering some aspect of it, encoding the information on the carrier. The modulated carrier is amplified and applied to an antenna. The oscillating current pushes the electrons in the antenna back and forth, creating oscillating electric and magnetic fields, which radiate the energy away from the antenna as radio waves. The radio waves carry the information to the receiver location.
At the receiver, the oscillating electric and magnetic fields of the incoming radio wave push the electrons in the receiving antenna back and forth, creating a tiny oscillating voltage which is a weaker replica of the current in the transmitting antenna. This voltage is applied to the radio receiver, which extracts the information signal. The receiver first uses a bandpass filter to separate the desired radio station's radio signal from all the other radio signals picked up by the antenna, then amplifies the signal so it is stronger, then finally extracts the information-bearing modulation signal in a demodulator. The recovered signal is sent to a loudspeaker or earphone to produce sound, or a television display screen to produce a visible image, or other devices. A digital data signal is applied to a computer or microprocessor, which interacts with a human user.
The radio waves from many transmitters pass through the air simultaneously without interfering with each other. They can be separated in the receiver because each transmitter's radio waves oscillate at a different…
The linearized problem of plasma oscillations in layer (particularly, in thin films) in external longitudinal alternating electric field is solved analytically. Specular - accommodative boundary conditions of electron reflection from the plasma boundary are considered. Coefficients of continuous and discrete spectra of the problem are found, and electron distribution function on the plasma boundary and electric field are expressed in explicit form. Absorption of energy of electric field in layer is calculated.
Everything we examined (2)
This check searched the claim as stated. It did not run a separate search for evidence against it.