Adenosine triphosphate (ATP), the chemical energy currency of biology, is synthesized in eukaryotic cells primarily by the mitochondrial ATP synthase. ATP synthases operate by a rotary catalytic mechanism where proton translocation through the membrane-inserted FO region is coupled to ATP synthesis in the catalytic F1 region via rotation of a central rotor subcomplex. We report here single particle electron cryomicroscopy (cryo-EM) analysis of the bovine mitochondrial ATP synthase. Combining cryo-EM data with bioinformatic analysis allowed us to determine the fold of the a subunit, suggesting a proton translocation path through the FO region that involves both the a and b subunits. 3D classification of images revealed seven distinct states of the enzyme that show different modes of bending and twisting in the intact ATP synthase. Rotational fluctuations of the c8-ring within the FO region support a Brownian ratchet mechanism for proton-translocation-driven rotation in ATP synthases.

Protons find a path Adenosine triphosphate (ATP) synthases are dynamos that interconvert rotational and chemical energy. Capturing the complete structure of these multisubunit membrane-bound complexes has been hindered by their inherent ability to adopt multiple conformations. Srivastava et al. used protein engineering to freeze mitochondrial ATP synthase from yeast in a single conformation and obtained a structure with the inhibitor oligomycin, which binds to the rotating c-ring within the membrane. Hahn et al. show that chloroplast ATP synthase contains a built-in inhibitor triggered by oxidizing conditions in the dark chloroplast. The mechanisms by which these machines are powered are remarkably similar: Protons are shuttled through a channel to the membrane-embedded c-ring, where they drive nearly a full rotation of the rotor before exiting through another channel on the opposite side of the membrane (see the Perspective by Kane). Science, this issue p. eaas9699, p. eaat4318; see also p. 600 The structure of an intact ATP synthase provides insight into how the motor and catalytic components are coupled. INTRODUCTION The mitochondrial adenosine triphosphate (ATP) synthase is the enzyme responsible for the synthesis of more than 90% of the ATP produced by mammalian cells under aerobic conditions. The chemiosmotic mechanism, proposed by Peter Mitchell, states that the enzyme transduces the energy of a proton gradient, generated by the electron transport chain, into the major energy currency of the cell, ATP. The enzyme is a large (about 600,000 Da, in the monomer state) multisubunit complex, with a water soluble complex (F1) that contains three active sites and a membrane complex (Fo) that contains the proton translocation pathway, principally comprised of the a subunit and a ring of 10 c subunits, the c10-ring (10 in yeast, 8 in mammals). F1 has a central rotor that, at one end, is within the core of F1 and, at the other end, is connected to the c10-ring of Fo. During ATP synthesis, the c10-ring rotates, driven by the movement of protons from the cytosol to the mitochondrion, and in turn, the rotor rotates within F1 in steps of 120o. The rotation of the rotor causes conformational changes in the catalytic sites, which provides the energy for the phosphorylation of adenosine diphosphate (ADP), as first proposed in the binding-change hypothesis by Paul Boyer. The peripheral stalk acts as a stator connecting F1 with Fo and prevents the futile rotation of F1 as the rotor spins within it. RATIONALE Structural studies of the ATP synthase have made steady progress since the structure of the F1 complex was described in pioneering work by John Walker. However, obtaining a high-resolution structure of the intact ATP synthase is challenging because it is inherently dynamic. To overcome this conformational heterogeneity, we locked the yeast mitochondrial rotor in a single conformation by fusing a subunit of the stator with a subunit of the rotor, also called the central stalk. The engineered ATP synthase was expressed in yeast and reconstituted into nanodiscs. This facilitated structure determination by cryo–electron microscopy (cryo-EM) under near native conditions. RESULTS Single-particle cryo-EM enabled us to determine the structures of the membrane-embedded monomeric yeast ATP synthase in the presence and absence of the inhibitor oligomycin at 3.8- and 3.6-Å resolution, respectively. The fusion between the rotor and stator caused a twisting of the rotor and a 9° rotation of the c10-ring, in the direction of ATP synthesis, relative to the putative resting state. This twisted conformation likely represents an intermediate state in the ATP synthesis reaction cycle. The structure also shows two proton half-channels formed largely by the a subunit that abut the c10-ring and suggests a mechanism that couples transmembrane proton movement to c10-ring rotation. The cryo-EM density map indicates that oligomycin is bound to at least four site

The cyclic modulation of nucleotide-binding properties of the three catalytic β subunits by a series of conformational changes was an attractive explanation for the postulated binding change mechanism of ATP synthase. In the crystal structure of the catalytic F₁ domain of this enzyme there is indeed a complex made up of three α subunits and three β subunits arranged in alternation around a central α-helical segment of the γ subunit. This complex is asymmetric owing to the different conformations of the β subunits. The change in conformation is brought about by rotation of the rigid yet curved segment, which has meanwhile been proven experimentally.

The F0F1 ATP synthase is a large complex of at least 22 subunits, more than half of which are in the membranous F0 sector. This nearly ubiquitous transporter is responsible for the majority of ATP synthesis in oxidative and photo-phosphorylation, and its overall structure and mechanism have remained conserved throughout evolution. Most examples utilize the proton motive force to drive ATP synthesis except for a few bacteria, which use a sodium motive force. A remarkable feature of the complex is the rotary movement of an assembly of subunits that plays essential roles in both transport and catalytic mechanisms. This review addresses the role of rotation in catalysis of ATP synthesis/hydrolysis and the transport of protons or sodium.

FoF1-ATP synthase (FoF1) is a motor enzyme that couples ATP synthesis/hydrolysis with a transmembrane proton translocation. F1, a water-soluble ATPase portion of FoF1, rotates by repeating ATP-waiting dwell, 80 degrees substep rotation, catalytic dwell, and 40 degrees -substep rotation. Compared with F1, rotation of FoF1 has yet been poorly understood, and, here, we analyzed ATP-driven rotations of FoF1. Rotation was probed with an 80-nm bead attached to the ring of c subunits in the immobilized FoF1 and recorded with a submillisecond fast camera. The rotation rates at various ATP concentrations obeyed the curve defined by a Km of approximately 30 microM and a Vmax of approximately 350 revolutions per second (at 37 degrees C). At low ATP, ATP-waiting dwell was seen and the kon-ATP was estimated to be 3.6 x 10(7) M(-1) x s(-1). At high ATP, fast, poorly defined stepwise motions were observed that probably reflect the catalytic dwells. When a slowly hydrolyzable substrate, adenosine 5'-[gamma-thio]triphosphate, was used, the catalytic dwells consisting of two events were seen more clearly at the angular position of approximately 80 degrees . The rotational behavior of FoF1 resembles that of F1. This finding indicates that "friction" in Fo motor is negligible during the ATP-driven rotation. Tributyltin chloride, a specific inhibitor of proton translocation, slowed the rotation rate by 96%. However, dwells at clearly defined angular positions were not observed under these conditions, indicating that inhibition by tributyltin chloride is complex.

The 2 nanomotors of rotary ATP synthase, ionmotive F(O) and chemically active F(1), are mechanically coupled by a central rotor and an eccentric bearing. Both motors rotate, with 3 steps in F(1) and 10-15 in F(O). Simulation by statistical mechanics has revealed that an elastic power transmission is required for a high rate of coupled turnover. Here, we investigate the distribution in the F(O)F(1) structure of compliant and stiff domains. The compliance of certain domains was restricted by engineered disulfide bridges between rotor and stator, and the torsional stiffness (kappa) of unrestricted domains was determined by analyzing their thermal rotary fluctuations. A fluorescent magnetic bead was attached to single molecules of F(1) and a fluorescent actin filament to F(O)F(1), respectively. They served to probe first the functional rotation and, after formation of the given disulfide bridge, the stochastic rotational motion. Most parts of the enzyme, in particular the central shaft in F(1), and the long eccentric bearing were rather stiff (torsional stiffness kappa > 750 pNnm). One domain of the rotor, namely where the globular portions of subunits gamma and epsilon of F(1) contact the c-ring of F(O), was more compliant (kappa congruent with 68 pNnm). This elastic buffer smoothes the cooperation of the 2 stepping motors. It is located were needed, between the 2 sites where the power strokes in F(O) and F(1) are generated and consumed.

The F-ATP synthase, consisting of F1 and FO motors connected by a central rotor and the stators, is the enzyme responsible for synthesizing the majority of ATP in all organisms. The F1 (αβ)3 ring stator contains three catalytic sites. Single-molecule F1 rotation studies revealed that ATP hydrolysis at each catalytic site (0°) precedes a power-stroke that rotates subunit-γ 120° with angular velocities that vary with rotational position. Catalytic site conformations vary relative to subunit-γ position (βE, empty; βD, ADP bound; βT, ATP-bound). During a power stroke, βE binds ATP (0°–60°) and βD releases ADP (60°–120°). Årrhenius analysis of the power stroke revealed that elastic energy powers rotation via unwinding the γ-subunit coiled-coil. Energy from ATP binding at 34° closes βE upon subunit-γ to drive rotation to 120° and forcing the subunit-γ to exchange its tether from βE to βD, which changes catalytic site conformations. In F1FO, the membrane-bound FO complex contains a ring of c-subunits that is attached to subunit-γ. This c-ring rotates relative to the subunit-a stator in response to transmembrane proton flow driven by a pH gradient, which drives subunit-γ rotation in the opposite direction to force ATP synthesis in F1. Single-molecule studies of F1FO embedded in lipid bilayer nanodisks showed that the c-ring transiently stopped F1-ATPase-driven rotation every 36° (at each c-subunit in the c10-ring of E. coli F1FO) and was able to rotate 11° in the direction of ATP synthesis. Protonation and deprotonation of the conserved carboxyl group on each c-subunit is facilitated by separate groups of subunit-a residues, which were determined to have different pKa’s. Mutations of any of any residue from either group changed both pKa values, which changed the occurrence of the 11° rotation proportionately. This supports a Grotthuss mechanism for proton translocation and indicates that proton translocation occurs during the 11° steps. This is consistent with a mechanism in which each 36° of rotation the c-ring during ATP synthesis involves a proton translocation-dependent 11° rotation of the c-ring, followed by a 25° rotation driven by electrostatic interaction of the negatively charged unprotonated carboxyl group to the positively charged essential arginine in subunit-a.

As the H+ ions traverse the complex, the shaft of the complex rotates. This rotation enables other portions of ATP synthase to encourage ADP and Pi to create ATP. In accounting for the total number of ATP produced per glucose molecule through aerobic respiration, it is important to remember the following points: Therefore, for every glucose molecule that enters aerobic respiration, a net total of 36 ATPs are produced (Figure 24.9). Gluconeogenesis is the synthesis of new glucose molecules from pyruvate, lactate, glycerol, or the amino acids alanine or glutamine. This process takes place primarily in the liver during periods of low glucose, that is, under conditions of fasting, starvation, and low carbohydrate diets. So, the question can be raised as to why the body would create something it has just spent a fair amount of effort to break down? Certain key organs, including the brain, can use only glucose as an energy source; therefore, it is essential that the body maintain a minimum blood glucose concentration. When the blood glucose concentration falls below that certain point, new glucose is synthesized by the liver to raise the blood concentration to normal.

F1FO-ATP synthase, the enzyme complex responsible for adenosine triphosphate (ATP) production, is universally conserved and central to cellular energy metabolism in bacteria as well as in mitochondria and plastids-organelles derived from ancestral bacteria. Although its basic structure and rotational catalytic mechanism are conserved, F1FO-ATP synthase exhibits remarkable regulatory diversity, which is evident in its structural variations, tissue-specific isoforms, and ATP synthesis and hydrolysis mechanisms, reflecting the metabolic demands and environmental contexts of different organisms and organelles. Among the diverse F1FO-ATP synthase isoforms, the plastid F1FO-ATP synthase exhibits unique regulatory features, including redox-dependent modulation, which adjusts enzyme activity in response to light availability. Certain angiosperms possess two isoforms of the γ subunit, encoded by ATPC1 and ATPC2, which give rise to redox-sensitive and redox-insensitive forms of the enzyme, respectively. The latter is active in the dark and may contribute to the maintenance of the proton motive force regulation, thereby supporting stress adaptation in non-photosynthetic tissues. In this review, through a phylogenetic analysis of the γ subunit, we integrate structural, physiological, and evolutionary aspects of plastid F1FO-ATP synthase and discuss how the diversification of ATP synthases, especially within plastid, underpins their broader physiological significance beyond ATP production. Furthermore, we discuss why the chloroplast ATP synthase must be redox-regulated.

synthesis of ATP is an endergonic process, which requires an input of energy. Both the electron transport chain and the ATP synthase are embedded in a Oxidative phosphorylation or electron transport-linked phosphorylation or terminal oxidation, is the metabolic pathway in which cells use enzymes to oxidize nutrients, thereby releasing chemical energy in order to produce adenosine triphosphate (ATP). In eukaryotes, this takes place inside mitochondria. Almost all aerobic organisms carry out oxidative phosphorylation. This pathway is so pervasive This phosphorylation reaction is an equilibrium, which can be shifted by altering the proton-motive force. In the absence of a proton-motive force, the ATP synthase reaction will run from right to left, hydrolyzing ATP and pumping protons out of the matrix across the membrane. However, when the proton-motive force is high, the reaction is forced to run in the opposite direction; it proceeds from left to right, allowing protons to flow down their concentration gradient and turning ADP into ATP. Indeed, in the closely related vacuolar type H+-ATPases, the hydrolysis reaction is used to acidify cellular compartments, by pumping protons and hydrolysing ATP. ATP synthase is a massive protein complex with a mushroom-like shape. The mammalian enzyme complex contains 16 subunits and has a mass of approximately 600 kilodaltons. The portion embedded within the membrane is called FO and contains a ring of c subunits and the proton channel. The stalk and the ball-shaped headpiece is called F1 and is the site of ATP synthesis. The ball-shaped complex at the end of the F1 portion contains six proteins of two different kinds (three α subunits and three β subunits), whereas the "stalk" consists of one protein: the γ subunit, with the tip of the stalk extending into the ball of α and β subunits. Both the α and β subunits bind nucleotides, but only the β subunits catalyze the ATP synthesis reaction. Reaching along the side of the F1 portion and back into the membrane is a long rod-like subunit that anchors the α and β subunits into the base of the enzyme. As protons cross the membrane through the channel in the base of ATP synthase, the FO proton-driven motor rotates. Rotation might be caused by changes in the ionization of amino acids in the ring of c subunits causing electrostatic interactions that propel the ring of c subunits past the proton channel. This rotating ring in turn drives the rotation of the central axle (the γ subunit stalk) within the α and β subunits. The α and β subunits are prevented from rotating themselves by the side-arm, which acts as a stator. This movement of the tip of the γ subunit within the ball of α and β subunits provides the energy for the…